3 & 5 Axis CNC Routing in Lawrenceville, GA
Precise, repeatable cuts in plastics and aluminum sheet and plate, holding tolerances as tight as .0005" using Heidenhain linear scales. From one prototype to full production runs, for customers across metro Atlanta and the Southeast.
What we do
Our C.R. Onsrud routers have tables up to 72" × 144", so big parts and big nests run without re-fixturing. Vacuum pumps hold material flat across the table: no vises and no toe clamps to work around, which means more of every sheet becomes parts.
Every routing job is nested by software before it runs, packing the most parts possible onto each sheet. You pay for less scrap, and your parts come off the machine sooner.
When a part needs more than a flat profile, our 5 axis hybrid mill cuts pockets and complex contours, and our Mazak VTC-200C vertical machining center handles machined features on long parts.
Plastic sheet & plate
Acetal, UHMW, nylon, HDPE, PEEK, polycarbonate, ABS, G10, GPO-3 and Lube-X, cut to clean, accurate profiles.
Aluminum sheet & plate
Flat profiles, holes and pockets in aluminum sheet and plate, held to tight tolerances.
5 axis pockets & contours
Complex pockets and contours from your 3D models on our 5 axis hybrid mill.
Nested for every job
Software nesting gets the most parts from each sheet, so you pay for less scrap.
Equipment
- C.R. Onsrud 5 Axis Hybrid Mill 60" × 144"
- C.R. Onsrud 3 Axis E-Series 72" × 144"
- Mazak VTC-200C Vertical Machining Center 79" × 20"
Materials
Don't see yours? Ask us and we'll let you know what we can do.
- Acetal
- UHMW
- Nylon
- HDPE
- PEEK
- Polycarbonate
- ABS
- G10
- GPO-3
- Lube-X
- Aluminum
How it works
1. Send your files
Upload your drawings with material, quantity and due date.
2. Get a quote
We review your files and follow up with pricing and lead time.
3. We make it
Your parts are cut, checked and ready for pickup or delivery.
Questions
What tolerances can you hold on routed parts?
Our routers use Heidenhain linear scales and hold tolerances as tight as .0005". Mark the critical dimensions on your drawing and we'll confirm when we quote.
How large a sheet can you route?
Our 3 axis C.R. Onsrud E-Series has a 72" × 144" table and our 5 axis hybrid mill has a 60" × 144" table.
Which plastics do you route?
Acetal (Delrin), UHMW, nylon, HDPE, PEEK, polycarbonate, ABS, G10, GPO-3 and Lube-X. Don't see yours? Ask us and we'll let you know what we can do.
What files can I send?
DXF, DWG, STEP, IGES, STL, SolidWorks, Fusion 360, Parasolid, AI, SVG, EPS, PDF and image files all work. Send what you have and we'll follow up if we need more.
Do you do one-offs or only production?
Both. We cut everything from a single prototype to full production runs.
Do you deliver?
Yes. We deliver finished parts on our own trucks anywhere within 200 miles of our Lawrenceville shop, including Atlanta, Athens, Gainesville, Chattanooga, Knoxville, Greenville–Spartanburg, Columbia and Charlotte. Anywhere else in the United States, we ship UPS and FedEx small package and LTL freight daily. Delivery on our trucks may require a minimum order.
Ready for a quote?
Send your drawings with material, quantity and due date.